Assuming you’ve purchased a new Galaxy S6 Edge Plus and you mistakenly bricked the smartphone, or you’ve already rooted the smartphone and needed to unroot it, then I advise you follow the guide below.
Unbricking or unrooting any smartphone is no big deal, all you need to do is to flash the smartphone with its stock firmware, and you’re done.
In this guide, I would walk you through the process on how to easily unroot or unbrick any rooted or bricked Samsung galaxy S6 Edge Plus.
How to Unbrick and Unroot Samsung Galaxy S6 Edge Plus
Step 1: Download and install Samsung Galaxy S6 Edge Plus drivers from here, to your PC
Step 2: Enable USB debugging on Samsung Galaxy S6 Edge Plus.
Step 3: After that, download Stock firmware file from here, and move the downloaded files to the desktop screen of your computer.
Step 4: After that, Boot your Galaxy S6 Edge Plus into Download Mode. To perform the operation, you have to power off your device and then press, Volume Down + Power + Home. Press Volume Up now to continue to Download Mode.
Step 5: Once your device is in download mode, simply connect the phone to your PC via the use of USB cable and the ODIN application would notify an added message.
Step 6: After that, choose AP in Odin and select the Stock firmware file in which you have downloaded, the .tar extension. Also endeavor that the re-partition is not ticked in the odin.
Step 7: Finally, click on the start button, and the process would begin immediately. Once the process is completed, you would notice the RESET or PASS message on the ODIN screen. Then your device would boot into recovery mode, and the device would be restarted automatically.
That’s it. Disconnect your Galaxy S6 Edge Plus device from your computer, and you would notice a fresh look on it.
0 comments:
Post a Comment
Your Comment have been submited and will be Visible after Approval